Folding Boom Geometry
Linked arm sections reduce the vertical clearance required during opening.
Automatic Boom Barrier Gates
Folding Arm Barrier Gates
Space-saving folding boom barriers for parking entrances with restricted overhead clearance.
Product Overview
Folding Arm Barrier Gate
Designed for vehicle entrances with limited headroom, Our folding arm barrier gates raise in linked sections so the boom can operate beneath ceilings or overhead structures. Drive speed, folded geometry, safety inputs and access-control interfaces can be configured for the lane and operating workflow.
- 7-Day Delivery Time
- Quick Reply
- Custom Services
- Reliable Quality
- Feature: 15+ Years R&D Experience
Product Introduction
Introduction of Folding Arm Barrier Gate
A folding arm barrier gate controls vehicle entry where a conventional straight boom cannot rise to its full height. Its linked arm folds upward during opening, making it suitable for underground car parks, covered entrances and sites with overhead restrictions. Our configurations can combine adjustable DC drive technology, safety detectors and interfaces for LPR/ANPR, RFID/UHF or ticketing systems. Final selection should be based on clear ceiling height, lane width, boom geometry, traffic volume, power supply and site safety requirements.
Product Key Features
Designed for Low-Clearance Entrances
Adjustable Movement
Opening and closing performance can be matched to the selected boom geometry.
Covered-Site Use
Suitable for underground parking and entrances beneath ceilings or structures.
Access Integration
Connect LPR/ANPR, RFID/UHF, ticketing, remote control or operator commands.
Safety Inputs
Coordinate loop detectors, radar and photocells before automatic closing.
Manual Operation
Emergency release and site-specific operation can be confirmed for each model.
Specification
Folding Arm Barrier Gates Specifications
Technical values remain pending until their source status is confirmed in WordPress.
Swipe horizontally to compare models.
| Product Parameter | ZB-BG01-B | ZB-BG02-B | ZB-BG03-B | ZB-BG04-B | ZB-BG05-B |
|---|---|---|---|---|---|
| Input voltage & frequency | AC 110/220 V 50/60 Hz | AC 110/220 V 50/60 Hz | AC 110/220 V 50/60 Hz | AC 110/220 V 50/60 Hz | AC 110/220 V 50/60 Hz |
| Driving method / motor type | Brushless DC motor | Brushless DC motor | Brushless DC motor | Brushless DC motor | Brushless DC motor |
| Motor control voltage | 24 V DC | 24 V DC | 24 V DC | 24 V DC | 24 V DC |
| Motor rated power | 150 W | 150 W | 150 W | 150 W | 150 W |
| Opening / closing speed | 1.5–6 s adjustable | 1.5–6 s adjustable | 1.5–6 s adjustable | 1.5–6 s adjustable | 1.5–6 s adjustable |
| Cabinet dimensions (W × D × H) | 330 × 260 × 1040 mm | 340 × 230 × 1020 mm | 330 × 280 × 980 mm | 350 × 290 × 1020 mm | 350 × 290 × 980 mm |
| Cabinet material | 1.5–2.0 mm sheet metal | 1.5–2.0 mm sheet metal | 1.5–2.0 mm sheet metal | 1.5–2.0 mm sheet metal | 1.5–2.0 mm sheet metal |
| Boom arm type | Folding arm | Folding arm | Folding arm | Folding arm | Folding arm |
| Boom arm length | 3–6 m optional | 3–6 m optional | 3–6 m optional | 3–6 m optional | 3–6 m optional |
| Boom arm material | Carbon fiber / aluminum alloy | Carbon fiber / aluminum alloy | Carbon fiber / aluminum alloy | Carbon fiber / aluminum alloy | Carbon fiber / aluminum alloy |
| Design cycle life | ≥1,000,000 cycles | ≥1,000,000 cycles | ≥1,000,000 cycles | ≥1,000,000 cycles | ≥1,000,000 cycles |
| Ingress protection rating | IP54 | IP54 | IP54 | IP54 | IP54 |
| Operating temperature | −35 °C to +65 °C | −35 °C to +65 °C | −35 °C to +65 °C | −35 °C to +65 °C | −35 °C to +65 °C |
| Operating humidity | ≤90% RH | ≤90% RH | ≤90% RH | ≤90% RH | ≤90% RH |
| Cabinet color | Orange / grey / customized | Orange / grey / customized | Orange / grey / customized | Orange / grey / customized | Orange / grey / customized |
| Remote-control range & frequency | ≤100 m · 344 MHz | ≤100 m · 344 MHz | ≤100 m · 344 MHz | ≤100 m · 344 MHz | ≤100 m · 344 MHz |
Description
- Folding Arm Barrier Gate Applications: Folding arm barrier gates control vehicle access at underground car parks, covered entrances and other lanes with limited overhead clearance. The articulated boom folds as it rises, allowing a controlled entrance where the available ceiling height may not suit a straight arm.
- Clearance and Boom Geometry: Lane width, ceiling height, mounting position and the folded arm envelope should be reviewed together. We help select the boom arrangement around the actual opening path, nearby structures and vehicle clearance requirements.
- Drive and Operating Speed: Motor configuration and opening speed are selected with the folded boom geometry and expected traffic flow in mind. The final operating setup should be checked against the approved arm and site conditions before production.
- Safety and Access Integration: Compatible loop detectors, radar sensors and photocells can be coordinated with the barrier controller. LPR/ANPR, RFID/UHF, ticketing, remote-control or operator commands can be connected according to the required entry and exit workflow.
- Cabinet and Project Configuration: Cabinet appearance, finish, boom layout and selected control functions can be reviewed for the site. Underground and covered installations also require attention to mounting space, service access and the position of overhead equipment.
- Model Selection and Support: Share the clear lane width, finished ceiling height, expected traffic volume, power supply, installation drawings and integration requirements. Our team can use these details to recommend a folding arm barrier gate configuration and confirm the final specification.
Product Details
Folding Arm Barrier Gate Details
Compare the approved product models below. Values marked Pending require technical-source confirmation.
Project Enquiry
Discuss Your Folding Arm Barrier Gate Project
Share the lane width, clear ceiling height, quantity, destination and access-control requirements. Our team will review the suitable folding-arm configuration.